| HS6-37N1Z Kaydon Slewing Ring Bearings | D:75 mm; Sealing solution:-; Da min.:62.7 mm; Specific static load factor K0:250 N/mm²; Basic dynamic load rating C:156 kN; Design (sliding contact surface combination):Steel/PTFE sintered; r2 min.:1 mm; B:35 mm; α:6 °; Da max.:71 mm; da min.:54 mm; C:28 mm; Material constant KM:1400; Specific dynamic load factor K:100 N/mm²; Basic static load rating C0:390 kN; Lubricant:Maintenance free &nd; |
| XA200352-H INA Slewing Ring Bearings | Outside Ring Width B:2.500 mm; Outside Diameter D:9.000 mm; Features:Shields; Bore Size d:4.000 mm; Grease Limiting Speed:63000 rpm; C0r - Static Load Rating:0.23 kN; Radius Rs min:0.100 mm; Weight:0.0006 Kg; Cr - Dynamic Load Rating:0.64 kN; Oil Limiting Speed:75000 rpm; |
| XSU140944 INA Slewing Ring Bearings | Weight:0.02 KGS; Seals or Shields:Open Type; Availability:In Stock; D:250mm; Cage Type:Steel; d:140mm; SKU:22228-e1-k-c4-qbl; B:68mm; Clearance:C4; |
| MTE-705T Kaydon Slewing Ring Bearings | Oil Lubrication - T Seal:1700 rpm; Dimension A:4.13 in; Eng Internal Radial Clearance - Min:0.0053; UPC Code:0883450111430; Dimension F:14.25 in; Eng Internal Radial Clearance - Max:0.0067; Y2 - Geometry Factor:4.06; Dimension L:4.59 in; Dimension C:5.5 in; Bearing Number:22222; Pre Install Clearance Min:0.0053 in; Shaft Size :100 mm; Locking Style:Single V-Lock; Dimension SV:4.13 in; Dimension D Min:10.04 in; |
| RKS.161.14.0414 SKF Slewing Ring Bearings | d:20 mm; N:12.3 mm; Hexagonal key size for grub screw N:3 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Housing material:Composite; Recommended diameter for attachment bolts, mm G:10 mm; Da:68.3 mm; J:63.5 mm; B1:43.7 mm; Limiting speed:5000 r/min; Basic static load rating C0:6.55 kN; A:30 mm; A3:3.2 mm; T:45.6 mm; Basic dynamic load rating C:12.7 kN; Fatigue load limit Pu:0.28 kN; |
| VSI200644-N INA Slewing Ring Bearings | A3:3.2 mm; A:34.5 mm; N:14 mm; J6:106 mm; d:34.925 mm; Basic static load rating C0:15.3 kN; Basic dynamic load rating C:25.5 kN; Recommended tightening torque for grub screw:16.5 N·m; N4:4 mm; Recommended diameter for attachment bolts, inch G:0.5 in; s1:32.3 mm; Db2:95 mm; A5:22 mm; J7:29 mm; Da:106.4 mm; Housing material:Cast iron; A1:13 mm; Limiting speed:1100 r/min; Fatigue load limit Pu:0.655 kN; |
| HS6-43N1Z Kaydon Slewing Ring Bearings | Cage Type:Steel; Availability:In Stock; Fatigue Load Rating (kN):1.25; Limiting Speed Rating (r/min):9000; D:100mm; d:55mm; Weight:0.02 KGS; Clearance:C3; Reference Speed Rating (r/min):14000; Condition:New; SKU:6211/c3-skf; B:21mm; Static Load Rating (kN):29; Seals or Shields:Open Type; Dynamic Load Rating (kN):46.2; |
| RK6-37P1Z Kaydon Slewing Ring Bearings | Cg - Geometry Factor8:0.216; db - Cone Backface Backing Diameter:16.1 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:78900 lbf; B - Double Cone Width:6.0000 in; C0 - Static Radial Rating:710000 lbf; Series:LM665900; Ab - Cage-Cone Frontface Clearance:0.18 in; Cone Part Number:LM665949DGW; d:15.1875 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:56500 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:137000 lbf; |