| No. | Brand | m | F | r | d | B | H | A | J |
| MCFR 52A S | MCGILL | - | 89 mm | - | - | - | - | - | - |
| CCFH 1 1/8 SB | MCGILL | - | - | - | - | - | - | - | - |
| CCFH 2 S | MCGILL | - | - | - | - | 32 mm | - | - | - |
| MCFD 35 X | MCGILL | - | - | - | - | 42.9 mm | - | - | - |
| PCFE 2 1/2 | MCGILL | - | - | - | - | - | - | 40 mm | 157 mm |
| CF 2 BULK | MCGILL | - | - | - | 2.1875 in | - | - | - | - |
| RD 28 | MCGILL | - | - | - | 15 mm | 34 mm | - | - | - |
| SDMCF 25 | MCGILL | - | - | - | - | - | - | - | - |
| SDMCF 50 | MCGILL | 4.7 mm | - | 0.6 | 20 mm | 31 mm | - | - | - |
| MCYRR 35 | MCGILL | - | - | - | - | - | - | - | 88.5 mm |
| CF 1 1/2 | MCGILL | - | - | - | 22.22 mm | - | - | - | - |
| BCF 2 1/2 SB | MCGILL | - | - | - | 50.8 mm | 45.3 mm | - | - | 176 mm |
| SB 22316 W33 YSS | MCGILL | - | 40.5 mm | - | - | 27 mm | - | - | - |
| BCCFE 1 1/2 SB | MCGILL | - | - | - | - | 65.1 mm | 69.9 mm | - | - |
| CCYR 2 3/4 S | MCGILL | - | - | - | - | 68.3 mm | - | - | - |
| SB 22309 W33 YSS | MCGILL | - | - | - | - | 18 mm | - | - | - |
| MCFR 62 X | MCGILL | - | - | - | 45 mm | - | - | - | - |
| PCF 3 | MCGILL | - | - | - | - | - | - | - | - |
| MCFR 26 X | MCGILL | - | - | - | - | 21.5 mm | - | - | - |
| MCFR 90 BX | MCGILL | - | - | - | 44.45 mm | 41.2 mm | - | 40 mm | - |
| MCFD 40 X | MCGILL | - | - | - | - | - | - | - | - |
| CF 2 1/4 S | MCGILL | - | - | - | - | - | - | - | 159 mm |
| MCFE 30 SX | MCGILL | - | - | - | 45 mm | - | - | - | - |
| FCF 2 3/4 | MCGILL | - | - | - | 30.16 mm | 30 mm | - | 33.5 mm | 82.5 mm |
| 3.5 Inch | 88.9 Millimeter x 4.5 Inch | 114.3 Millimeter x 2 Inch | 50.8 Millimeter MCGILL MR 56 SS Needle Non Thrust Roller Bearings | C:12 mm; T max.:100 °C; m:4 mm; Recommended tightening torque for set screw:3.2 Nm; Weight:0.1 kg; T min.:-20 °C; G:10-32UNF; C0:4.78 kN; r:0.6; S:6 mm; Size (mm):3.5 Inch | 88.9 Millimeter x 4.5 Inch | 114.3 Millimeter x 2 Inch | 50.8 Millimeter ; |
| 0.625 Inch | 15.875 Millimeter x 1.125 Inch | 28.575 Millimeter x 1 Inch | 25.4 Millimeter MCGILL GR 10 RS Needle Non Thrust Roller Bearings | Flinger Material:Steel; End Cap Groove:Yes; Housing Material:Cast Iron; d:1.1250 in; Bearing Locking Device:Eccentric Collar; Ring Size:Standard; Retainer Material:Nylon; Brand:Baldor-Dodge; Base to Center Height:Not Applicable; Bearing Series:206 Series; Size (mm):0.625 Inch | 15.875 Millimeter x 1.125 Inch | 28.575 Millimeter x 1 Inch | 25.4 Millimeter ; |
| MCGILL MCYRR 30 Cam Follower and Track Roller - Yoke Type | C:19.5 kN; A:24 mm; B:23.8 mm; H1:44 mm; e:13 mm; J:116 mm; T min.:-20 °C; S:9 mm; T max.:100 °C; Recommended tightening torque for set screw:11.5 Nm; |
| MCGILL MCYR 40 S Cam Follower and Track Roller - Yoke Type | B1:56.3 mm; d1:62 mm; J:150 mm; d:45 mm; Weight:2.27 kg; s1:39.7 mm; B:42.8 mm; T max.:100 °C; G:R1/8"; A1:32 mm; |
| MCGILL CCFH 4 SB Cam Follower and Track Roller - Stud Type | Designation of open end cover:SCOU209-26; Recommended tightening torque for set screw:8 Nm; N:14mm; S:19 mm; C:31.85 kN; Designation of housing:FE209N-; A:40 mm; A1:13 mm; Weight:2.36 kg; s1:24.6 mm; |
| MCGILL CCFH 2 3/4 S Cam Follower and Track Roller - Stud Type | Static load, C0:2.83 kN; Brand:NTN; Fatigue limit load, Cu:0.13 kN; Nlim (grease):15,000 rpm; Mass:0.03 kg; rs min:0.3 mm; f0:13.9; Da max:30 mm; d:15 mm; Characteristic inner ring frequency, BPFI:5.41 Hz; |
| MCGILL MCF 47 SX Cam Follower and Track Roller - Stud Type | N:26mm; s1:38.9 mm; S:33.3 mm; J:230.8 mm; d:63.5 mm; H:88.9 mm; A1:67 mm; Recommended tightening torque for set screw:27.1 Nm; L:330.2 mm; A:88.9 mm; |
| MCGILL MCFR 19 Cam Follower and Track Roller - Stud Type | d1:27.2 mm; C0:4.78 kN; T min.:-20 °C; A1:10 mm; L:86 mm; J:63.5 mm; C:9.55 kN; Recommended tightening torque for set screw:5.5 Nm; s1:23.05 mm; Designation of bearing:ES202G2; |
MCGILL CFH 1 1/8 SB Cam Follower and Track Roller - Stud Type Video